SN-SG-AQ10 Elevator Safety Components With Belleville Spring For
Passenger Lift
Recommend for passenger lift
Product advantage: this product receives the signal from the speed
limiter during the overspeed operation of the elevator out ofc
ontrol, the belleville spring is used as the elastic element to
provide acting force of the safety gear wedge to clamp the guide
rail, and to stop the uncontrolled elevator car, This product is
provided with the compact structure and small volume because of the
use of the belleville spring as an elastic element, and the safety
gear, which can be easily installed and operated,acts stably and
reliably , and can be used on the car side or the counterweight
side.
| Rated Speed | (P+Q)max | Width of guide rails | Type |
| V : 0.25~2.50m/s | 1000~2800kg | 10, 15.88, 16mm | SN-SG-AQ10 |
 |
Product advantage:this product receives the signal from the speed
limiter during the overspeed operation of the elevator out of
control.
the 7-type spring is used as the elastic element,to provide the
acting force ofthe safety gear wedge to clamp the guide rall,and
stop the
uncontrolled elevator car.This safety gear can be easily installed
and operated,with stable and reliable action.t can be used for both
car
side and counterweight side.This product passed the national
standard certification, CE certification and Rus s ia n EAC
certification.
| Rated Speed | (P+Q)max | Width of guide rails | Type |
| V :≤2.50m/s | 2900~5200kg 1600~3200 600~2000 | 9≤k≤16mm | SN-SG-AQ11 |
 |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements.
Configuration is not only for wire rope and rated load, but also
considered the size of the traction, as a result, the tensile
strength of wire rope is greater than the weight of the lift. The
safety factor is equipped with more than four wire rope. So it
won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator
running?
If it occurs, the elevator will automatically stop due to the
electrical and mechanical safety device. In case of power
failure,elevator brakes will automatically taken. In addition, the
power supply departments such as planned outage, prior notice are
also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of
elevator will automatically restart without any danger. With anti
clamping switch, once the gate touched, this switching action make
the elevator unable to be closed and even reopened. In addition,
closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the
(tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily
proportional to the operation complexity. Therefore, escalators
designed by us apply an integrated structure, so that the equipment
is more precise and more efficient and allows easier and more
convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
