Home > Elevator Electrical Parts >

Elevator Electrical Parts Photoelectric Switch With IP54 Protection

Product Categories

SHANGHAI SUNNY ELEVATOR CO.,LTD

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Elevator Electrical Parts Photoelectric Switch With IP54 Protection

Ask Lasest Price
Brand Name :	SUNNY
Model Number :	BE-G3SE4
Certification :	CE,ISO9001
Price :	$5~10
Payment Terms :	Western Union, T/T, L/C,Paypal
Supply Ability :	1000 Pcs/ Month
Delivery Time :	7-15working days

Add to Cart

Product Details
Company Profile

Elevator Electrical Parts Photoelectric Switch With IP54 Protection

Elevator Electrical Parts Photoelectric Switch With IP54 Protection

BE-G3SE4 Products Detail

Technical Data
Output Mode	PNP output
Detection Distance (groove width)	23mm
Standard Testing Objects	Opaque more than ∅ 1.5mm
Light Source (Wavelength)	IR LED(850-940nm)
Supply Voltage	DC12~24V ±10 ％ Ripple (p-p) ＜ 10 ％
Current Consumption	＜ 40mA
Control Output	Load supply voltage is lower than DC26.4V, load current is lower than 100mA (the remaining voltage is lower than 1V) NPN Open type output Light in: ON/Shading: ON Switch mode
Protective Circuit	Power reverse connection protection
Response Time	Action ＜ 1ms Reset ＜ 1ms
Working Ambient Temperature	Receives illumination: Filament Lamp ≤ 3,000lx; Sunlight ≤ 10,000lx
Ambient Temperature	Work:-25~+55 C, Storage: -40~+70 C (non-freezing, non-condensing)
Ambient Humidity	Work: 35~85 ％ RH, Storage: 35~95 ％ RH (non-condensing)
Dielectric Resistance	20M Ω (DC500V Megger) between whole conductor and the shell
Voltage Withstand	AC1,000V 50/60Hz 1min between whole conductor and the shell
Vibration(Endurance)	10~55Hz Amplitude fluctuation 1.5mm 2hs X, Y, Z each direction
Impact(Endurance)	500m/s2 X, Y, Z each direction three times
IP Code	IEC Standard IP54
Connection Type	Wire Leads Type (Standard Lead Length 2m/500mm)
Indicator Lamp	Action Indicator (Red)
Gross Weight	≈ 100g
Wiring Mode	Red: Power Supply +/- Black: Power Supply -/+ Yellow: Output OUT

BE-GS3B4 Products Detail

Technical Data
Output Mode	PNP output
Detection Distance (groove width)	30mm
Standard Testing Objects	Opaque more than ∅ 1.5mm
Light Source (Wavelength)	IR LED(850-940nm)
Supply Voltage	DC12~24V ±10 ％ Ripple (p-p) ＜ 10 ％
Current Consumption	＜ 40mA
Control Output	Load supply voltage is lower than DC26.4V, load current is lower than 100mA (the remaining voltage is lower than 1V) NPN Open type output Light in: ON/Shading: ON Switch mode
Protective Circuit	Power reverse connection protection
Response Time	Action ＜ 1ms Reset ＜ 1ms
Working Ambient Temperature	Receives illumination: Filament Lamp ≤ 3,000lx; Sunlight ≤ 10,000lx
Ambient Temperature	Work:-25~+55 C, Storage: -40~+70 C (non-freezing, non-condensing)
Ambient Humidity	Work: 35~85 ％ RH, Storage: 35~95 ％ RH (non-condensing)
Dielectric Resistance	20M Ω (DC500V Megger) between whole conductor and the shell
Voltage Withstand	AC1,000V 50/60Hz 1min between whole conductor and the shell
Vibration(Endurance)	10~55Hz Amplitude fluctuation 1.5mm 2hs X, Y, Z each direction
Impact(Endurance)	500m/s2 X, Y, Z each direction three times
IP Code	IEC Standard IP54
Connection Type	Wire Leads Type (Standard Lead Length 2m/500mm)
Indicator Lamp	Action Indicator (Red)
Gross Weight	≈ 200g
Wiring Mode	Red: Power Supply +/- Black: Power Supply -/+ Yellow: Output OUT

Elevator Electrical Parts Photoelectric Switch With IP54 Protection

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.

Product Tags:


*From:	Your email address is incorrect!
*To:	SHANGHAI SUNNY ELEVATOR CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!